Krone Vendro 680, Operating Instructions Manual, Page: 62 / 104

8 Operation
8.6 Operating the mechanical border spreading system
62
Vendro 680
Original operating instructions 150001223_01_en
8.6 Operating the mechanical border spreading system
Preselecting the spreading direction
1
1
I
II
I
II
KW000-320
Preselecting spreading direction left
„ Mount the screw connection (1) in position (I).
Preselecting spreading direction right
„
Mount the screw connection (1) in position (II).
INFO
The screw serves as a stop so that the tension bar can engage safely.
1
2
3
4
KWG000-042
Border spreading conveys the crops away from the edge of the field. The tedder runs at an
angle behind the tractor.
ü The machine is in the working position, see Page 58 .
„
Pull the operating cable (1) from the tractor and keep it tensioned.
ð
The bolt (2) of the border spreading system (3) is unlocked.
„ Drive round a bend until the wheels are inclined in the required direction.
„
Release the operating cable (1).
ð
The bolt (2) engages in the required position.
„ The arrow (4) indicates the central position of the wheels.
INFO
To keep the load on the wheels as low as possible, avoid taking bends too tightly when the
border spreading system is set.