Krone Vendro 680 Operating Instructions Manual Download Page 55

Page: 55 / 104

Operation

Locking/releasing stop cock

8.1

Vendro 680

Original operating instructions 150001223_01_en

Operation

WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

To avoid accidents, the basic safety instructions must be read and observed,

see

Page 12

WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

The safety routines must be read and observed to avoid accidents,

see Page 24

NOTICE

Damage to the machine caused by reversing

The machine is designed to drive forwards. Never reverse while the machine is switched on
and in working position.

Lift the machine before reversing.

8.1

Locking/releasing stop cock

KSG000-047

Locking

Move stop cock (1) into position (I).

Releasing

Move the stop cock (1) into position (II).

Summary of Contents for Vendro 680









































































































Search results

Summary of Contents for Vendro 680

Reviews:

Krone Vendro 680, Operating Instructions Manual, Page: 55 / 104

Search results

Summary of Contents for Vendro 680

Reviews: