Krone Vendro 680, Operating Instructions Manual, Page: 51 / 104

Start-up 7
Connecting road travel lighting 7.8
Vendro 680
Original operating instructions 150001223_01_en 51
1
2
3
1
2
4
KWG000-028
For spreading or tedding:
„ Dismount the sheet (1) and the wing screw (2).
„
Mount the universal shaft on the lower PTO shaft end (3).
„
Mount the sheet (1) and the wing screw (2) on the upper housing.
For night swathing:
„ Dismount the sheet (1) and the wing screw (2).
„
Mount the universal shaft on the upper PTO shaft end (4).
„ Mount the sheet (1) and the wing screw (2) on the lower housing.
7.8 Connecting road travel lighting
For the version with "Road travel lighting"
NOTICE
Short circuit caused by impurities and moisture in the plug connection
The machine may be damaged by a short circuit.
„
Make sure that the plugs and sockets are clean and dry.
1
2
KWG000-010
The road travel lighting is connected by means of the enclosed 7-pin lighting cable (2).
ü
The machine is shut down and safeguarded, see Page 24 .
„ Connect the 7-pin plug of the lighting cable (2) to the 7-pin socket (1) of the tractor.
„
Lay the lighting cable (2) so that it does not touch the tractor wheels.