Krone KWT 1600 Original Operating Instructions Download Page 51

Page: 51 / 96

Operation

Removing/mounting the safety device which prevents unauthorised use

8.1

KWT 1600

Original Operating Instructions 150000169_04_en

Operation

WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

To avoid accidents, the basic safety instructions must be read and observed,

refer to

page 13

WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

The safety routines must be read and observed to avoid accidents,

refer to page 25

NOTICE

Damage to the machine caused by reversing

The machine is designed to drive forwards. Never reverse while the machine is switched on
and in working position.

Lift the machine before reversing.

8.1

Removing/mounting the safety device which prevents unauthorised
use

The safety device is used to prevent unauthorised use when the machine has been switched
off.

The machine has been parked,

refer to page 62

KS000-413

Removing

Remove the padlock (1) and take it with you.

Mounting

Mount the padlock (1) and keep the key in a safe place.

Summary of Contents for KWT 1600

































































































Search results

Summary of Contents for KWT 1600

Reviews:

Krone KWT 1600, Original Operating Instructions, Page: 51 / 96

Search results

Summary of Contents for KWT 1600

Reviews: