1
Information on This Document
1.1
Validity
6
Original Operating Instructions 150000802_00_en
1
Information on This Document
1.1
Validity
This document is valid for machines of type:
EasyCut F 320
All information, illustrations and technical data in this document correspond to the latest state at
the time of publication.
We reserve the right to make design changes at any time and without notification of reasons.
1.2
Re-ordering
If this document should become wholly or partically unusuable, you can obtain replacement
operating instructions by stating the document number given on the cover sheet.
1.3
Applicable documents
To ensure that the machine is used safely and as intended, observe the following further
applicable documents.
Component designation
Manufacturer
Document type
KRONE
Assembly instructions
1.4
Target group of this document
This document aims at the operator of the machine who fulfills the minimum requirements of
personnel qualification,
.
1.5
How to use this document
1.5.1
Directories and references
Contents/headers
The contents and headers in this document ensure quick orientation in the chapters.
Index
The index contains catchwords in alphabetical order which enable to find information on a
desired topic easily. The index can be found on the last pages of this document.
Cross references
Cross references to another place in the document or to another document are in the text with
page number.
Examples:
•
Check all screws on the machine for firm attachment,
. (
INFORMATION
: If
you use this document in electronic form, you get to the link to the stated page by clicking
with the mouse.)
•
For further information, refer to the operating instructions of the universal shaft
manufacturer.
