Krone EasyCut F 320, Original Operating Instructions

Page: 53 / 86

Maintenance - General Information 11
Maintenance table 11.1
Original Operating Instructions 150000802_00_en 53
11 Maintenance - General Information
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
„
To avoid accidents, the relevant safety instructions must be read and observed,
refer to
page 12
.
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
„
The safety routines must be read and observed to avoid accidents,
refer to page 23
.
WARNING
Risk of injury caused by test run of the machine
If a test run is performed after repair, maintenance or cleaning work or after technical
intervention, the machine may behave unpredictably. Thus there is a risk of serious injuries or
death.
ü
The machine is in working position.
„
Do not switch on the drives until the mower is resting on the ground and you are
absolutely sure that there is no one in the danger zone.
„
The test run of the machine must only be started from the driver's seat.
11.1 Maintenance table
11.1.1 Maintenance - Once after 50 hours
Changing the oil
Main gearbox
refer to page 61
Mower gearbox
refer to page 62
Cutterbar
refer to page 63
11.1.2 Maintenance - Before the beginning of the season
Checking oil level
Main gearbox
refer to page 61
Mower gearbox
refer to page 62
Cutterbar
refer to page 63
Components
Check/replace blades
refer to page 67
Check/replace cutting discs/mower drums
refer to page 71
Check/replace retaining bolt (blade screw con-
nection)
refer to page 70