Krone EasyCut B 870 CR, Operating Instructions Manual

Page: 60 / 108

10 Settings
10.7 Setting roller distance
60
EasyCut B 870 CR
Original Operating Instructions 150000706_01_en
Setting the locking
ü
The machine is in the working position, refer to page 49 .
ü
The machine is shut down and safeguarded, refer to page 24 .
„ Loosen the screw connection (3).
„
Readjust the locking (2) in the oblong hole.
„ Tighten the screw connection (3).
„
Check the locking (2).
10.7 Setting roller distance
KMG000-090
The distance (X) of the rollers is set via the screw (1) on the right-hand and left-hand machine
side. To avoid high wear on the rollers, the dimension X must not be below
2 mm .
ü
The machine is in the working position, refer to page 49 .
ü
The machine is shut down and safeguarded, refer to page 24 .
„ Loosen nut (2).
„
Turn the screw (1).
ð
In direction (I): The distance between the rollers increases.
ð In direction (II): The distance between the rollers reduces.
„
Tighten the nut (2).