Krone EasyCut B 870 CR, Operating Instructions Manual

Page: 35 / 108

Technical data 4
Consumables 4.1
EasyCut B 870 CR
Original Operating Instructions 150000706_01_en 35
4.1 Consumables
NOTICE
Complying with change intervals for biooils
To ensure high life expectancy of the machine, it is absolutely necessary to comply with
change intervals for biooils due to the ageing of the oils.
NOTICE
Mixing types of oil
If types of oil are mixed, the machine could be damaged.
„
Never mix different types of oil.
„
Before changing the type of oil, consult customer service. Never use engine oil.
Bio-degradable lubricants on request
4.1.1 Oils
Designation Filling quantity Specification Initial filling ex works
Input gearbox 2.0 l SAE 90 Wiolin ML 4 SAE 90
Main gearbox upper
part 0.45 L each SAE 90 Wiolin ML 4 SAE 90
Main gearbox bottom
part 0.45 L each SAE 90 Wiolin ML 4 SAE 90
Upper roller gearbox 0.3 l each SAE 90 Wiolin ML 4 SAE 90
Cutterbar 7.0 l each SAE 90 Wiolin ML 4 SAE 90
The filling quantities of the gearboxes are guide values. The correct values result from oil
change/oil level check,
refer to page 70 .
4.1.2 Lubricating greases
Designation Filling quantity Specification
Manual lubrication points As required
1
Lubricating grease to DIN
51818 of NLGI class 2, Li
soap with EP additives
1
Lubricate the manual lubrication point until grease escapes at the bearing position. After
lubricating, remove the grease escaping from the bearing position.