To this Document
7
2.5.2
Direction Information
Direction information in this document such as front, rear, right and left always applies in the
direction of travel.
2.5.3
Term “Machine”
Throughout the rest of this document, the mower will also be referred to as the “machine”.
2.5.4
Figures
The figures in this document do not always represent the exact machine type. The information
which refers to the figure always corresponds to the machine type of this document.
2.5.5
Scope of Document
In addition to standard equipment, accessories kits and versions of the machine are described
in this document. Your machine may deviate from this document.
2.5.6
Means of representation
Icons in the text
In this document, the following means of representation are used:
Action step
A bullet point (
) designates an action step you have to perform, as for example:
• Set the left outside mirror.
Sequence of actions
Several bullet points (
) located in front of a sequence of action steps identify a sequence of
actions to be performed step by step, as for example:
• Loosen counter nut.
• Set the screw.
• Tighten counter nut.
List
Dashes (-) identify lists such as, for example:
– Brakes
– Steering
– Lighting
Summary of Contents for EasyCut 6210 CV
Page 97: ......
