manualshive.com logo in svg

Krone Comprima V 180, Original Operating Instructions, Page: 58 / 242

Share
Download
Krone Comprima V 180 Original Operating Instructions Download Page 58

7

Commissioning

7.6

Connecting/disconnecting compressed air connections for the compressed air brake

58

Comprima V 180

Original Operating Instructions 150001053_00_en

7.6

Connecting/disconnecting compressed air connections for the
compressed air brake

The machine features a dual-line compressed air braking system. The coupling heads are
connected to the machine for attachment of the supply line (2) (red coupling head) and brake
line (1) (yellow coupling head) of the tractor.

1

2

BP000-101

ü

The machine is shut down and safeguarded, 

refer to page 25

.

Connecting

Observe the correct order when connecting the compressed air lines.

„

Firstly, connect the brake line (1) (yellow coupling head).

„

Then connect the supply line (2) (red coupling head).

Disconnecting

Observe the correct order when disconnecting the compressed air lines.

„

Firstly, disconnect the supply line (2) (red coupling head).

„

Then disconnect the brake line (1) (yellow coupling head).

7.7

Adjusting drawbar eye

For "drawbar eye bottom" version

1

2

1

2

I

II

RP000-266

Summary of Contents for Comprima V 180



















































































































































































































































Reviews:

No comments