Krone Comprima V 180, Original Operating Instructions, Page: 199 / 242

Malfunction, cause and remedy 17
Malfunctions on the central chain lubrication system 17.4
Comprima V 180
Original Operating Instructions 150001053_00_en 199
Possible cause Remedy
The wrapping material brake
has not been correctly set.
„
Adjust the wrapping material brake, refer to page 150 .
17.4 Malfunctions on the central chain lubrication system
Malfunction: The oil consumption is too low.
Possible cause Remedy
The nozzles of the central
chain lubrication system are
soiled so that the pump pres-
sure is too low. „ Clean the dosing units of the central chain lubrication
system,
refer to page 189 .
„
Clean the pump, refer to page 188 .
The pressure is too low, as
the pump is not pressed in for
the complete stroke. „ Increase the oil quantity, refer to page 188 .
„
Have the pump removed and cleaned or replaced by a
KRONE service partner.
The oil is too thick.
„
Use recommended oil, refer to page 41 .
The central chain lubrication
system is contaminated. „ Clean the entire central chain lubrication system.
Malfunction: The oil consumption is too high.
Possible cause Remedy
The main tube is torn. „ Have the main tube repaired or replaced changed by a
KRONE service partner.
The oil is too thin. „ Use recommended oil, refer to page 41 .
„
Reduce the set oil quantity.
Malfunction: The machine is dry.
Possible cause Remedy
There is no pressure. The
pump is not functioning. „ Have the pump removed and cleaned or replaced by a
KRONE service partner.
There is no pressure. The
main tube is torn. „ Have the main tube repaired or replaced changed by a
KRONE service partner.
There is no pressure. The
system has no oil. „ Bleed the central chain lubrication system, refer to
page 188 .
The system is blocked by de-
posits.
„
Clean the entire central chain lubrication system.
The system is blocked, as the
main tube is jammed.
„
Have the main tube repaired or replaced changed by a
KRONE service partner.
Malfunction: The pump is not pressed for the full stroke.
Possible cause Remedy
The oil is too thick.
„
Use recommended oil, refer to page 41 .
The dosing units are blocked. „ Clean the dosing units, refer to page 189 .