Krone Comprima V 180, Original Operating Instructions, Page: 196 / 242

17 Malfunction, cause and remedy
17.2 Disturbances during or after the baling process
196
Comprima V 180
Original Operating Instructions 150001053_00_en
Possible cause Remedy
The density of the bale core
has been set too solid.
„
Adjust the density of the bale core, refer to page 147 .
„ If required, reduce the baling pressure.
17.2 Disturbances during or after the baling process
Malfunction: The bale formation conveyor is rotating slower than it should. Slippage is
occurring.
Possible cause Remedy
The baling pressure is too
high.
„
Reduce the baling pressure, refer to page 146 .
The rotational speed is too
high. „
Reduce the rotatonal speed.
The sensor B01 "Speed of
bale chamber" is defective. „ Check the sensor and the cabling for damage, refer to
page 202 .
The crops consist of very
heavy grass without structure
(e.g. clover grass). „ Reduce the density of the bale core, refer to page 147 .
„ Have the KRONE service partner install an additional drive.
The additional drive can be ordered by quoting order number
20 063 652*.
Malfunction: Pressure does not build up.
Possible cause Remedy
The handwheel for setting the
baling pressure is in the park-
ing position. „ Turn the handwheel to the working position, refer to
page 146 .
„
Set the required baling pressure on the handwheel, refer to
page 146 .
Disturbance: The round bale does not roll or rolls just slowly out of the bale chamber.
Possible cause Remedy
The sides are filled excess-
ively.
„
Produce narrower swaths, refer to page 66 .
„ Do not drive too far on the side.
The baling pressure is too
high. „ To reduce the baling pressure, refer to page 146 .
Malfunction: The machine is running unevenly and the baling process in the bale chamber is
difficult to start.
Possible cause Remedy
The density of the bale core is
too high. „ Reduce the density of the bale core, refer to page 147 .
„
Reduce the baling pressure, refer to page 146 .
Malfunction: The hydraulic oil has become too hot.
Possible cause Remedy
The hydraulic oil filter is
blocked. „ Change the hydraulic oil filter, refer to page 194 .
Disturbance: The tailgate cannot be closed completely.