8
Operation
8.16
Net and chamber film wrapping
90
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
8.16
Net and chamber film wrapping
For the "Net and chamber film wrapping" version
8.16.1
Inserting a net or film roll
To ensure that the sleeve clamp can completely catch in the sleeve of the net or film roll, the
sleeve should be made of cardboard. If a sleeve is made of plastic with grooves, the sleeve
clamp can dig into the grooves and transfer the brake force from the brake disc to the net or film
roll. Therefore, plastic sleeves without grooves are not recommended.
If sleeves are made of cardboard, ensure in particular that they are stored correctly. Moisture or
high air humidity may cause cardboard sleeves to soften and impair the tying function. Also
observe the specifications of the wrapping material manufacturer on the package.
INFORMATION
For trouble-free use in the field, KRONE recommends one of the "KRONE excellent" nets or
films, see label on the machine with the number 27 018 640 *.
ü
The machine is shut down and safeguarded,
.
Before inserting a film roll:
Before inserting the film, check the film roll for damage.
If the film roll is damaged:
Unwind the damaged film and cut it off.
Cut off the bulges at the side of the film roll.
8
9
10
11
1
6
4
7
3
5
2
2
RP000-039
Raise the lever (4).
Swivel the roll holder (6) and brake disc (1) forwards.
Remove the brake disc (1).
Take a new net or film roll out of the package. Ensure that the beginning of the roll faces
towards the machine and can be pulled out from above.
Push the net or film roll (9) onto the roll holder (6) and push on the support (7).
Push the brake disc (1) with the sleeve clamps (2) anti-clockwise all the way into the
sleeve (10) of the net or film roll (9).
ð
The net or film roll (9) is permanently locked in the roll holder (6).
Swivel the roll holder (6) back into the machine and lift it into the lock using the lever (4).