Settings
17
Setting the retaining comb for chamber film wrapping 17.13
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
183
17.13
Setting the retaining comb for chamber film wrapping
For the "Net and chamber film wrapping" version
I
II
3
4
4
5
5
1
2
RP000-030
Position I
The trapezoidal rubbers (4) on the underside of the retaining comb have been pre-assembled
with the short side pointing backwards, seen in direction of travel. The figure shows the
underside of the retaining comb.
Position II
If the blue strips (1) are taken along by the first net feed roller with a delay or are not taken
along, you can reverse the trapezoidal rubbers (4). This provides additional support.