Krone Comprima F 155 XC, Original Operating Instructions, Page: 175 / 278

Settings 17
Setting wrapping material overhang 17.5
Comprima F 155 XC
Original Operating Instructions 150001050_01_en 175
17.5 Setting wrapping material overhang
1
X
Y
I
II
2
2
1
RP000-877
I For version with "Net wrapping" II For version with "Net wrapping and
chamber film wrapping"
After each tying process, the net should overhang by X=170–200 mm or the film by Y=230–
260 mm .
Z
5 3 4
RP000-878
Net wrapping: Dimension preset by KRONE Z=365 mm
Chamber film wrapping: Dimension preset by KRONE Z=370-375 mm
If the wrapping material overhang (1) is not X=170–200 mm or Y=230–260 mm , the wire
rope (5) must be adjusted as follows.
The greater the dimension Z of the wire rope (5), the greater the wrapping material
overhang (1).
The smaller the dimension Z of the wire rope (5), the smaller the wrapping material
overhang (1).
„
Adjust the wire rope (5) to the required length using the nut (4) and pawl (3).