Krone Comprima F 155 XC, Original Operating Instructions, Page: 146 / 278

15 Terminal menus
15.17 Menu 10 “Manual operation” (for the “Net and chamber film wrapping” version)
146
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
Moving the tying actuator
„
To move the tying actuator to the feed position, press .
„ To move the tying actuator to the cutting position, press .
„
To move the tying actuator to the tying position, press .
15.17 Menu 10 “Manual operation” (for the “Net and chamber film
wrapping” version)
10
n
EQG003-007
ü
For The menu level is active, refer to page 136 .
„
To open the menu, press .
Æ
The display shows menu “Manual operation”.
The following status displays may appear on the screen:
Icon Explanation
Tying actuator (net/film) is in feed position.
Tying actuator (net/film) is in cutting position.
Tying actuator (net/film) is in tying position.
Position is not defined.
The keys on the sides of the terminal can be used to control the following functions:
Icon Explanation
Move tying actuator (net/film) to feed position
Move tying actuator (net/film) to cutting position
Move tying actuator (net/film) to tying position