Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 268

Page: 268 / 374

Terminal machine functions

6.2

Keys

Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,

Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1

Comfort 1.0_en

Icon

Explanation

For the “Hydraulic blade group control system” version

Blade group A swivelled in.

Blade group A and B swivelled in.

Blade group B swivelled in.

Blade group A and B swivelled out.

Blade group A and B swivelled out and blade cassette is down for blade removal
(deactivated).

For the “Working lights” version

Switched on.

Switched off.

6.2

Keys

The available icons comply with the equipment of the machine. The following represented icons
are not always available.

Icon

Designation

Explanation

Feed net in manual mode.

Press the key to guide the net to the round
bale.

Feed film in manual mode.

Press the key to guide the film to the round
bale.

Net wrapping in manual
mode.

The previously selected mode (manual
mode or automatic mode) is displayed in
the set tying type. Press the key to change
the mode.

Net wrapping in automatic
mode.

Chamber film wrapping in
manual mode.

The previously selected mode (manual
mode or automatic mode) is displayed in
the set tying type. Press the key to change
the mode.

Chamber film wrapping in
automatic mode.

Pre-select pick-up.

The previously selected setting, pick-up or
blade cassette adjustment is displayed.
Press the key to change the setting.

Preselect blade cassette
adjustment.

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Search results

Summary of Contents for Comprima F 125 XC-1

Reviews:

Brands by name

Popular brands

Krone Comprima F 125 XC-1, Operating Instructions Manual

Search results

Summary of Contents for Comprima F 125 XC-1

Reviews:

Brands by name

Popular brands