Terminal – machine functions [Medium 1.0/Comfort 1.0]
12
Setting the target number of MultiBales 12.25
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
139
20
4 cm
38 %
94 /
240
cm
2 /
4
2
1
EQG000-032
Value (1) and the bar display = actual bale length
Value (2) and the red mark on the bar display = set target bale length
Setting target bale length
Setting range: 1,000 - 2,700 mm/39 - 106 inch
Change value,
.
12.25
Setting the target number of MultiBales
INFORMATION
To prevent a mixture of entire bales and MultiBales, set the target number (2) of MultiBales
always at the start of an entire bale.
20
4 cm
38 %
94 /
240
cm
2 /
4
20
4 cm
108 bar
94 /
240
cm
2 /
4
2
2
1
1
EQ001-057
Value (1) = actual number of MultiBales
Value (2) = set target number of MultiBales
Setting target number
ü
The bale length has been set, .
Change value,
.
