manualshive.com logo in svg

Krone BiG Pack 870 HDP XC, Original Operating Instructions

Share
Download
Krone BiG Pack 870 HDP XC Original Operating Instructions Download Page 136

12

Terminal – machine functions [Medium 1.0/Comfort 1.0]

12.14 Opening/closing bale channel flaps

136

BiG Pack 870 HDP XC

Original Operating Instructions 150000760_00_en

12.14

Opening/closing bale channel flaps

Opening

„

Press 

.

Æ

The display switches from 

 to 

.

Closing

„

Press 

.

Æ

The display switches from 

 to 

.

12.15

Lower the bale chute

ü

The locking on the baling flaps is opened, 

refer to page 103

.

WARNING! Increased risk of injury! While the bale chute is being lowered, ensure that
there is nobody in the danger zone (particularly behind the machine). Press and hold
down 

.

The bale chute is lifted/lowered by means of the external momentary switches. 

refer to

page 104

).

12.16

Automatic bale ejection

„

To execute 10 bale ejections, press 

 again.

Æ

When the bale channel flaps are opened, 10 bale ejections are executed immediately.

Æ

When the bale channel flaps are closed, first the bale channel flaps are opened and then
10 bale ejections are executed.

12.17

Selecting "Counter/Detail counter" menu

„

Press 

.

Æ

The "Detail counter" menu is displayed, 

refer to page 164

.

12.18

Selecting a menu Level

„

To bring up the menu level from the working screen, press 

.

Æ

The display indicates the menu level.

Summary of Contents for BiG Pack 870 HDP XC



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands