1
Information on This Document
1.5
How to use this document
10
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
1.5.2
Information on direction
Information on direction in this document such as front, rear, right and left always applies in
direction of travel of the machine.
1.5.3
Term “machine”
Throughout the rest of this document, the “large square baler” will also be referred to as the
“machine”.
1.5.4
Figures
The figures in this document do not always represent the exact machine type. The information
which refers to the figure always corresponds to the machine type of this document.
1.5.5
Scope of the document
In addition to standard equipment, accessories kits and versions of the machine are described
in this document. Your machine may deviate from this document.
1.5.6
Means of representation
Icons in the text
The following means of representation (icons) are used to present the text more clearly:
This arrow characterizes an
action step
. Several arrows in a row identify a sequence of
actions to be performed step by step.
This icon identifies a
prerequisite
that has to be fulfilled to perform an action step or a
sequence of actions.
This arrow marks the
intermediate result
of an action step.
This arrow identifies the
result
of an action step or sequence of actions.
This bullet point identifies an
enumeration
. If the bullet point is intended, it identifies the
second level of the enumeration.
Icons in figures
The following icons can be used in the figures:
Icon
Explanation
Reference sign for parts
Position of a part (e.g. move from pos. I to pos. II)
Dimensions (e.g. B = width, H = height, L = length)
