4
Machine description
4.20
Description of hydraulic system functions
56
BiG Pack 1270
Original Operating Instructions 150000747_02_en
4.20
Description of hydraulic system functions
For “Comfort 1.0” version
1
BPG000-018
The hydraulic system of the machine is designed for tractors with a
constant flow system
and
for tractors with a
Load Sensing system
.
The hydraulic system of the machine has been set at the factory for tractors with the
constant
flow system
. In doing so, the system screw (1) has been completely unscrewed from the
control block.
The hydraulic system is adjusted to the hydraulic system of the tractor
(constant flow system
or Load Sensing system)
via the system screw (1) on the control block of the machine,
.
The control block is at front on left under the side hood next to the electronics box.
4.21
Description of bale brake functions
For "Weighing device" version
BP000-092
The first two rolls of the bale chute are locked via bale brake (1). This is necessary to achieve
an exact weight control of the big bales.
Lever in position (I) = rolls locked
Lever in position (II) = rolls can be turned freely
In order to ensure that the last big bale can be put down properly, the bale brake must be
released for the last bale.