Krone Big Pack 1270 Original Operating Instructions Download Page 334

Page: 334 / 440

Repairs, maintenance and settings by technicians

22.16 Checking/setting Variable Filling System (VFS)

334

BiG Pack 1270

Original Operating Instructions 150000747_02_en

22.16

Checking/setting Variable Filling System (VFS)

BPG000-047

Brake yoke

Threaded rod

Spring (zero adjuster)

Stop (left-hand machine side)

Zero adjuster

Sensing rake

Roll (zero adjuster)

Packer tray

Cam disc

Setting screw (anvil)

Tripping ratchet

Anvil

Grooved ball bearing (anvil)

Brake plate

Spring (triggering sensitivity)

22.16.1

Preset the threaded rod/stop of sensing rake

NOTICE

Damage to the machine due to moving the threaded rod

In order to avoid damage to the machine, never move the threaded rod (9) into position (VI).

For "MultiBale" version

NOTICE

Damage to the machine due to moving the sensing rake

In order to avoid damage to the machine, never modify the position of the sensing rake (11).

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Search results

Summary of Contents for Big Pack 1270

Reviews:

Krone Big Pack 1270, Original Operating Instructions, Page: 334 / 440

Search results

Summary of Contents for Big Pack 1270

Reviews: