Krone Big Pack 1270, Original Operating Instructions, Page: 228 / 440

19 Maintenance - Gearbox
19.2 Packer gearbox
228
BiG Pack 1270
Original Operating Instructions 150000747_02_en
Changing oil
ü
A suitable container is available for escaping oil.
„ Unscrew the locking screw of the filling hole (1).
„
Unscrew the drain plug (3) and drain the oil.
„
Mount the drain plug (3), tightening torque refer to page 206 .
„ Top up new oil the via filling hole (1) up to the middle of the viewing glass (2).
„
Screw in the locking screw of the filling hole (1) and tighten it firmly, Tightening torque refer
to page 206 .
19.2 Packer gearbox
INFORMATION
The oil level must be checked and changed with the machine in horizontal position. Use the
lower edges of the cross-members as a reference edge.
BP000-255
„ Comply with the safety routine "Safe execution of oil level check, oil and filter element
exchange",
refer to page 28 .
Check oil level
„
Unscrew the locking screw of the inspection hole (1).
ð
If the oil reaches up to the inspection hole (1):
„ Screw the locking screw into the inspection hole (1), tightening torque refer to page 206 .
ð
If the oil does not reach up to the inspection hole (1):
„
Refill with fresh oil up to the inspection hole (1) via the inspection hole (1).
„ Screw the locking screw into the inspection hole (1), tightening torque refer to page 206 .
Changing oil
ü A suitable container is available for escaping oil.
„
Unscrew the locking screw of the inspection hole (1) and the drain plug (2) and drain the oil.
„
Mount the drain plug (2), tightening torque refer to page 206 .
„
Refill with fresh oil up to the inspection hole (1) via the inspection hole (1).
„
Mount the locking screw of the inspection hole (1), Anziehdrehmoment refer to page 206 .