Krone Big Pack 1270, Original Operating Instructions, Page: 193 / 440

Driving and Transport 14
Preparing the machine for shipment 14.7
BiG Pack 1270
Original Operating Instructions 150000747_02_en 193
1 2 2 1
3
4
5
6
BPG000-079
Anchor points
The machine is equipped with four anchor points:
• 2 anchor points (4,5) on the back right and left of the yoke (2).
• 2 anchor points (3,6) on the front right and left of the drawbar (1).
Lifting the machine
ü The machine is shut down and safeguarded, refer to page 27 .
ü
The flywheel brake is tightened, refer to page 92 .
ü
For the “mechanical support jack” version: The support jack is in the transport
position, refer to page 110 .
ü
For the “hydraulic support jack” and “Comfort 1.0” versions: The support jack is in the
transport position, refer to page 110 .
ü
For “hydraulic support jack” version and “Medium 1.0” version: The support jack is in
transport position, refer to page 111 .
ü
The bale chute is lifted into transport position and secured, refer to page 104 .
ü
For “self-steering axle” version and “Medium 1.0” version: The self-steering axle is
locked, refer to page 187 .
ü For “self-steering axle” version and “Comfort 1.0” version: The self-steering axle is
locked, refer to page 135 .
ü
The pick-up has been lifted and secured via stop cock, refer to page 102 .
ü
All safety devices are locked.
„
Use a hoist with a minimum lifting capacity (depending on the approved total weight of the
machine), see machine rating plate,
refer to page 42 .
„ Attach the hoist on the 4 anchor points of the machine.
„
Ensure that the hoist is mounted correctly on the anchor points.