Krone Big Pack 1270 Original Operating Instructions Download Page 146

Page: 146 / 440

Terminal – Menus

13.4

Selecting a menu

146

BiG Pack 1270

Original Operating Instructions 150000747_02_en

Icon

Designation

Menu 13 “Counter”,

Menu 15 “Settings”,

13.4

Selecting a menu

Calling up menu

The menus are selected depending on used terminal (touch sensitive or not touch sensitive).

For version with “Touch sensitive and not touch sensitive terminal”

By means of adjacent keys

To select a menu, press the keys next to

until the desired menu is selected.

The selected menu is highlighted in colour.

To call up the menu, press the key next to

The menu opens.

INFORMATION

When equipped with “touch sensitive terminal”, the icons can directly be pressed.

By means of the scroll wheel

Select the desired menu by means of scroll wheel.

The selected menu is highlighted in colour.

To call up the menu, press the scroll wheel.

The menu opens.

For version with touch sensitive terminal

By pressing the icons

To call up a menu, press the icon (e.g.

) in the display.

The menu opens.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Search results

Summary of Contents for Big Pack 1270

Reviews:

Krone Big Pack 1270, Original Operating Instructions, Page: 146 / 440

Search results

Summary of Contents for Big Pack 1270

Reviews: