12
Foreign ISOBUS terminal
12.2
Varying functions to KRONE ISOBUS terminal
140
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
12.2
Varying functions to KRONE ISOBUS terminal
The job computer provides information and control functions of the machine on the display of
the external ISOBUS terminal. Operation with an external ISO terminal is similar to the KRONE
ISOBUS terminal. Prior to start-up, refer to the mode of operation of the KRONE ISOBUS
terminal in the operating instructions.
One major difference from the KRONE ISOBUS terminal is the arrangement and number of
keys with functions which are specified by the selected external ISOBUS terminal.
Only the functions which differ from the KRONE ISOBUS terminal are described below.
12.2.1
Scroll wheel
The
scroll wheel
is used to set the following values on the KRONE ISOBUS terminal
•
Target bale channel flap pressure/target bale channel flap force
•
Bale length
•
Number of MultiBales
In the case of ISOBUS terminals these values are set via a specified
selection key
(see
operating instructions of the terminal manufacturer).
12.2.2
Background colour/acoustic signals
Background colour
The "Background colour" menu is not called on external ISOBUS terminals. If such a setting
option is available, it is carried out directly on the external ISOBUS terminal (see operating
instructions of the terminal manufacturer).
Audio signals
If necessary, acoustic signals must be released on the external ISOBUS terminal (see operating
instructions of the terminal manufacturer).
