manualshive.com logo in svg

Krone ADW 27 eLB9, Operating Instructions Manual, Page: 79 / 92

Share
Download
Krone ADW 27 eLB9 Operating Instructions Manual Download Page 79

MAINTENANCE AND REPAIR

Operating instructions • Box Carrier • 505410619-02 • 05/2021

79

9.2.7 

Lubricating the trailer

NOTE

Material damage caused by dry lubrica-
tion points!

Too little or a lack of grease can result in
damage to moving parts.

► Lubricate the trailer regularly.

► Top up the grease on all the lubrication

points.

► Lubricate moving parts on the trailer

superstructure (e.g. door locks,
hinges) as needed.

► Lubricate the grease nipple on the turn

frame every 8,000 – 10,000 km or
once a month with a high-quality roller
bearing grease (lithium-saponified,
NLGI consistency class 2). To do so,
swivel the turn frame back and forth
until a relatively constant bead of
grease emerges from the bearing
clearance or sealing lips around the
entire circumference.

► Also observe the enclosed supplier

documentation.

9.2.8 

Electrical equipment

► Perform a visual check of the electrical

connections for the lighting and ABS/
EBS for wear and damage.

► Perform a visual check of the lighting

and signalling systems.

► Perform a visual inspection of the elec-

trical connections.

► Have defective electrical components

replaced by an authorised specialist
workshop.

► Only have work on the electrical equip-

ment performed by trained electricians,
or by personnel trained especially for
the purpose, in accordance with all ap-
plicable safety rules and regulations.

9.2.9 

Locking mechanism

► Perform a visual inspection for wear

and damage.

► Have defective or damaged compon-

ents replaced.

9.2.10 

Contour marking

► Perform a regular visual check of the

contour markings.

► Pay attention to damage, soiling and

visibility.

► Have defective or damaged contour

markings replaced.

9.2.11 

Coupling ring

!

 WARNING

Risk of accident caused by wear!

A worn coupling ring can cause the trailer
to tear off while driving and result in seri-
ous injuries and material damage.

► Check the wear on the coupling ring

regularly.

► Worn coupling rings must be replaced

by an authorised specialist workshop.

► Check the coupling ring for wear and

damage.

INFO

Observe the maintenance instructions, di-
mensions and values of the coupling ring
manufacturer. Worn coupling rings must
be checked and replaced by an authorised
specialist workshop.

► Check the mounting and tighten the

fastening bolts if required.

► Lubricate the coupling ring as needed.

9.2.12 

Bolted connections

► Check bolted connections regularly for

settling signs.

► Replace defective bolted connections

and those with visible damage.

► Observe the instructions about bolted

connections in the supplier document-
ation.

Summary of Contents for ADW 27 eLB9





























































































Reviews:

No comments