Krone ActiveMow R 200, Operating Instructions Manual

Page: 57 / 90

Maintenance - General Information 11
Maintenance table 11.1
ActiveMow R 200
Original Operating Instructions 150000521_04_en 57
Components
Check/replace retaining bolt (blade quick
fastener) refer to page 72
Check/replace blade carrier (blade quick
fastener) refer to page 73
Check/replace linings on cutterbar refer to page 76
Vent friction clutch refer to page 61
Check guard cloths refer to page 62
Tighten screws/nuts refer to page 58
11.1.3 Maintenance - Every 10 hours, but at least once a day
Checking oil level
Input gearbox refer to page 64
Main gearbox refer to page 65
Cutterbar refer to page 77
Components
Changing/replacing blades refer to page 69
Check/replace cutting discs/mower drums refer to page 75
Check/replace retaining bolt (blade screw con-
nection) refer to page 72
Check/replace retaining bolt (blade quick
fastener) refer to page 72
Check guard cloths refer to page 62
11.1.4 Maintenance - Every 50 hours
Components
Tighten screws/nuts on the machine refer to page 58
11.1.5 Maintenance - Every 200 hours
Changing oil
Input gearbox refer to page 64
Main gearbox refer to page 65
11.1.6 Maintenance - Every 6 years
Components
Have the hydraulic hoses replaced by your
KRONE service partner