Krone 870 HDP, Original Operating Instructions, Page: 467 / 568

Terminal – menus [Medium Plus/Comfort Plus Electronics] 8
Menu 13 "Counters" 8.13
Supplement to Operating Instructions 150000774_00 _en
BiG Pack 870 HDP, BiG Pack 870 HDP XC
61
Icon Designation
Decrease number of bales
Select "Uncut bales" counter
Select "Cut bales" counter
Display range of detail counter
Icon Designation Explanation
Selected customer counter • Here customer counter 1
• Further information refer to
page 59 .
"Total bales" counter Number of all bales
"Uncut bales" counter For the "cutting unit" version:
Number of uncut bales
"Cut bales" counter For the "cutting unit" version:
Number of cut bales
h
Operating hours counter Counts only when the PTO shaft is
running.
"Total length" counter • Total length of all bales for this
customer.
• In m or ft (depending on selected
system of units).
Knot counter For the "MultiBale" version:
Including the MultiBale knot
"Total weight" counter For the "bale scales" version:
Total weight of all bales
"Average weight" counter For the "bale scales" version:
Average weight of the weighed bales
Resetting customer counter
The customer counter to be reset must not be activated.
„ To select the customer counter, press or .
„ Press .
ð
The selected customer counter is reset to zero.
ð
The designation of the customer counter is not deleted.