Krone 870 HDP, Original Operating Instructions, Page: 457 / 568

Terminal – menus [Medium Plus/Comfort Plus Electronics] 8
Menu 1 "Knotter" 8.7
Supplement to Operating Instructions 150000774_00 _en
BiG Pack 870 HDP, BiG Pack 870 HDP XC
51
Recurring icons refer to page 43 .
Display area
Item Designation Explanation
(1) Blowing time • In seconds.
• Adjustable value range: 1 - 8 s
Info: To prevent an excessive pressure drop on
the pressure vessel, it is recommended first to
shorten the blowing interval,
refer to page 50 .
„ Change value, refer to page 46 .
8.7.6 Menu 1-9 "Calibrate MultiBale"
In this menu the sensor for locking the MultiBale can be calibrated. Following repair work, a
calibration may be required due to high operational demands or settling of the components, if
the centre bar is higher or lower than the outer bars.
1-9
4,9V 0,9V 1,1V
EQ001-005 / EQ001-082
ü
Menu 1 "Knotter" has been selected, refer to page 47 .
„
To open the menu, press .
Æ
The display shows the "Calibrate MultiBale" menu.
Recurring icons refer to page 43 .
ü The machine is shut down and safeguarded, refer to page 21 .
ü
The compressor unit has been filled.
Moving lock to "MultiBale" position
1-9
4,9V 4,9V 1,1V
1
2
EQ001-082 / BP000-389
„
Press and hold down until the centre bar and the left bar are the same height.