manualshive.com logo in svg

Krone 870 HDP, Original Operating Instructions, Page: 441 / 568

Share
Download
Krone 870 HDP Original Operating Instructions Download Page 441

Terminal – machine functions [Medium Plus/Comfort Plus Electronics]

7

Releasing/locking self-steering axle

7.12

Supplement to Operating Instructions 150000774_00 _en

BiG Pack 870 HDP, BiG Pack 870 HDP XC

35

7.12

Releasing/locking self-steering axle

Releasing

„

Press 

.

ð

The icon flashes until the self-steering axle is released.

Æ

The display switches from 

 to 

.

Lock

„

Press 

.

ð

The icon flashes until the self-steering axle is locked.

Æ

The display switches from 

 to 

.

7.13

Switching the starting aid on/off

Release

„

To release the starting aid, press 

.

ð

The display switches from 

 to 

ð

The starting aid is released.

If the released starting aid is not switched on within five seconds, the system resets the release.

Switching on

ü

The starting aid is released.

„

To switch on the starting aid, press 

.

Æ

The 

 symbol flashes.

When the speed of the starting aid is reached, the system switches off the starting aid.

Switching off

„

To switch off the starting aid, press 

.

Æ

The display switches from 

 to 

.

Æ

The starting aid is switched off.

Summary of Contents for 870 HDP

























































































































































































































































































































































































































































































































































































Reviews:

No comments