8
User – Settings
Night mode (reduced night mode)
Heating is reduced to the setback temperature on a permanent
basis. Hot water according to parameter 04, see page 15 (P04
Hot water according to program).
Summer mode
The heating system is switched off to save energy. Parameter 04 for
hot water must be set to 1, 2 or 4, see page 15 (P04 Hot water
according to program).
Select mode
1
Turn selector switch to “Mode”
▷
The new operating mode is displayed and flashes.
Mo Tu We Th Fr Sa Su
2
Select an operating mode using the rotary knob.
Press the OK button to confirm.
▷
The new operating mode is displayed.
▷
After you press the OK button, the current symbol is shown for
3 seconds before it starts flashing again.
4
Turn selector switch back to
.
Set heating program 1
Heating program 1 is assigned to automatic mode 1. It is used
to define the heating times for the working week (Mon–Fri) and the
weekend (Sat–Sun). You can set three heating times per day.
▷
During heating times the controller heats to desired room tem-
perature, between heating times to setback temperature.
▷
Factory setting:
Mon–Fri: 6:00 to 22:00
Sat–Sun: 7:00 to 23:00
1
Turn selector switch to “Prg1”
▷
This displays the heating program for the working week (Mon-Fri).
Mo Tu We Th Fr Sa Su
0
1
6
12
18
24
2
Press the OK button.
▷
The start time of the first heating time flashes.
Use the rotary knob to select the start time.
▷
The heating time can be set in 15 minute increments.
4
Press the OK button to confirm.
▷
The new start time is displayed.
5
Turn the rotary knob clockwise.
6
Press the OK button.
▷
The end of the first heating time flashes.
7
Use the rotary knob to select the end time.
8
Press the OK button to confirm.
