KROHNE OPTIWAVE 5200 C, Supplementary Instructions Manual

Page: 6 / 24

3
ELECTRICAL CONNECTION
6
OPTIWAVE 5200 C
www.krohne.com 10/2013 - 4003066901 - MA OPTIWAVE5200C-PA-R01-en-
3.1 Topology of a PROFIBUS PA network
The following diagram shows a typical network configuration with PROFIBUS PA devices in
hazardous and non-hazardous areas, as well as the connection of conventional non-PROFIBUS
devices (e.g. with 4
… 20 mA signals) to a PROFIBUS network.
The PROFIBUS PA segment is connected to a segment coupler which, among other things,
provides the conversion to the PROFIBUS DP bus line. In addition it provides the power supply for
bus
– powered PROFIBUS PA devices. Refer to the instruction manual of the segment coupler
concerning the DP bus parameters, e.g. the supported baud rates.
Refer also to the PROFIBUS PA User and Installation Guideline (Version 2.2, February 2003 PNO
Order No. 2.092).
Figure 3-1: PROFIBUS PA network
1
Control system (PLC); class 1 master
2
Engineering or operation control tool; class 2 master
3
PROFIBUS DP network with max. 12 Mbit/s
4
PROFIBUS PA segment coupler DP / PA
5
PROFIBUS PA network with 31.25 kbit/s
6 HART
®
device
7
More devices with 4 … 20 mA
8 Analogue I/O module