Back Panel Description
See Figure 3 on page 11
1 2
Krell S-300i
The S - 3 0 0 i back panel provides connections for all inputs and out-
puts, power on/off, and additional remote connections.
14 Left and Right Loudspeaker Outputs
The S - 3 0 0 i is equipped with standard binding posts for each
amplifier channel. These connectors accept bare wire, pins,
banana plugs, or spade lugs. Use the red terminal for the positive
connection and the black terminal for the negative connection.
15 Left and Right Balanced Analog Inputs
The S - 3 0 0 i is equipped with one pair of balanced (B-1) inputs via
XLR connectors.
16 Left and Right Single-Ended Analog Inputs
The S - 3 0 0 i is equipped with three pairs of single-ended (S-1,
S-2, or S-3) inputs via RCA c o n n e c t o r s .
17 iPod Input
The S - 3 0 0 i is equipped with a balanced stereo input via a locking
30-pin connector. The required 30-pin iPod cable is supplied.
18 RS-232
The RS-232 port receives messages from a computer-based con-
trol system, providing integrated control of all integrated functions.
The RS-232 input uses a 9-pin D-subminiature connector.
The RS-232 port does not funtion with the iPod Input..
19 Left and Right Preamp Outputs
The S - 3 0 0 i is equipped with a pair of single-ended pre-
amplifier outputs.
20 RC-5 In
The S - 3 0 0 i is equipped with an RC-5 input that makes custom
installation easy and secure by accepting baseband RC-5 input
commands from a remote IR detector or hardwired remote con-
t r o l l e r s .
21 12 VDC In /Out (12 V Tr i g g e r )
The 12 V Trigger allows you to turn the S-300i on or off, or to and
from stand-by, from other components.
AMPLIFIER CHANNEL
O U T P U T S
ANALOG INPUTS
ANALOG OUTPUTS
R E M O T E
C O N N E C T I O N S
N o t e
