NK8696
Version 3 - 04/2018
STEP 1.
Use the cams to attach the base to the
small clamp pad of your Kreg face clamp.
STEP 3.
Clamp the jig to your workpiece and
drill the pocket holes.
PORTABLE BASE
ITEM# KPDGB
STEP 2.
Slide the drill guide from your Kreg Jig
®
into
the portable base. Align the mark on the side
of the drill guide that matches the thickness
of the workpiece with the top edge of the
portable base. Screw in the locking pin.
For assistance with any Kreg product,
contact us through our Website or call Customer Service.
www.kregtool.com
Customer Service • Service à la clientèle • Servicio al cliente
800.447.8638
WARNING:
!
This product can expose you to chemicals including Carbon 1333-86-4 and other chemicals
which are known to the State of California to cause cancer and reproductive harm. For more information go to
www.P65Warnings.ca.gov.
WARNING:
!
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance
known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards
for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
