(4)
Turn the table top right side up,
making sure the table tracks do not fall
out and get damaged.
(5)
Lift the table tracks out of the table-
top slots. Leave the table-track bolts
and plastic retaining plates in place.
(6)
Mark the table frame member
adjacent to the side of the table with
the saw kerf (cutting side).
(7)
Remove the 16 screws securing
the table top to the aluminum frame
using the included star-drive bit and
remove the top. Discard the screws.
(1)
Position the new table top in the
aluminum frame with the cutting side
of the top on the side opposite the
mark on the frame.
ATTENTION
:
!
Rotating the new table top 180°
from the position of the old top avoids driving the new
table-top bolts into the aluminum frame at the same
locations where the old bolts were removed,
ensuring secure anchorage.
(2)
Drive the 16 new table-top screws
to attach the new table top to the
aluminum frame.
(3)
Position the table tracks in the slots.
ATTENTION
:
!
Different bolt spacing allows the
table tracks to be installed only in one orientation.
SETUP
Remove the old Project Table Top
Installing the Project Table Top
7
6
5
4
Retaining Plates
Mark
Saw Kerf
3
2
1
Saw Kerf
Mark
