SETUP
(1)
Remove the guide track, hinges,
hinge-mounting plates, and all
corresponding hardware. Retain all
components for reassembly.
(2)
Place the Project Table upside down
on a flat surface that will support the
table tracks when the nuts securing
them to the table top are removed.
ATTENTION
:
!
Two people are required to lift
the Project Table.
(3)
Remove all nuts, bar brackets,
and U-bolts fastening leg assemblies
1 and 2; the wheel assembly; and the
four nuts attaching the table tracks to the Project Table top.
Retain all nuts, bar brackets, and U-bolts for reassembly.
Remove the old Project Table Top
1
1
2
3
3
