KREBS Tex-2, Operating Instructions Manual

Page: 8 / 32

For your safety!
This machine can only be operated safely when the operating
and the safety instructions have been completely read and
strictly adhered to. It is recommended to receive practical
instruction before using the machine for the first time.
Do not use the tool if damp or if the surroundings are damp.
Always check the tool, power cord and plug before use. In the event of
damage, repair work should only be carried out by a specialist.
Ensure that there is adequate ventilation when working in
confined spaces.
Inhaling the aerosol can be a health hazard.
Always wear respiratory protection.
Danger of Explosion.
There must be no naked flames in the working area.
Do not smoke.
Do not spray inflammable or explosive liquids (e.g. petrol or spirit).
• The device must not be used in locations where explosive gases may occur.
• Paints and solvents (thinner) must have a flash point above 21°C.
• Never direct the spray jet towards people or animals. The spray material comes out of
the nozzle at high pressure. Danger of injury and infection!
• Only connect the power plug when the tool is OFF. Disconnect the power plug after
use.
• Always disconnect the power plug before performing any work on the tool. Do not
carry the tool by the power cord.
• Always keep the extension cable well away from the workplace.
• Keep the tool and accessories out of the reach of children.
• Only use original accessories.
8