background image

Assembling the VARIA Nozzle

1. Rotate the threaded holder 28 as far as possible against the circlip 27.
2. Ensure that the teflon washer 25 and the brass washer 26 are placed in the correct order

on the swirl head or in the nozzle head.

3. Screw the nozzle head onto the threaded holder and tighten by rotating both spanners

against each other.

4. Using the fitting spanner rotate the nozzle head back (to the right) until the 

VAR

IA Nozzle

is in the fine spray position.

5. Push the nozzle sleeve onto the nozzle head to the position which is most convenient for

working.

6. Tighten setscrew.

Tips

• Woven and knitted fabrics, which due to their nature and finish are particularly susceptible

to formation of ring marks, must be treated by application of a trace of fluid from the fine

mist spray, before the actual treatment begins.

• For very sensitive fabrics and also for removal of ring marks (caused by incorrect finish

with fine mist spray or drying), treatment is carried out only with the soft, fine mist spray.
For the actual rinsing out process the fine mist spray is brought as close to the fabric as

possible, without causing any damage (thread displacement). Immediately afterwards a
uniform transition from the dry to the wet fabric is produced by making circular movements

at a greater distance from the fabric. Repeat this process once or twice. Never allow too
much fluid to penetrate the fabric. Always work very quickly. Dry and if necessary, repeat

process.

• With the following types of stain, which occur less frequently

,

 it is necessary, in spite of

the increased danger of forming ring marks, to wet the stain before treatment with a few
drops of stain removing agent using, for instance, an oil can. Then the stain removing

agent together with dissolved staining substance can be removed by spraying with sol-
vent from the T

e

x-2. This treatment can be recommended for the following types of spot:

Special oils based on molybdenum sulphide, tallow

,

 wax, ballpoint pen ink, make-up,

stamp pad ink and also in some cases

 

stains of fruit juices.

11

Pos.

Order-No.

20

15-507-010

21

10-006-011

22

15-501-033

23

15-501-034

24

12-006-002

25

10-006-007

26

10-006-008

27

09-504-024

28

10-006-009

29

15-507-001

30

15-408-005

31

10-006-010

Summary of Contents for Tex-2

































Reviews: