background image

n

Only operate the mini spray gun in compliance with the values specified in (

 

Ä

 Chapter 13

‘Technical data’ on page 39

).

n

Make sure that the connected compressed air is oil-free and free from solid matter.

n

Operate the mini spray gun with processed, dried compressed air (air quality pursuant to DIN
ISO 8573-1: quality class 4).

n

Never point the compressed air at living beings.

No claims of any kind can be asserted due to damage resulting from misuse!

3.5  General safety instructions

 WARNING!

Life threatening risk of injury or property damage through the application of hazardous
media!

The application of hazardous media can lead to death, serious injuries or property damage.

Ensure the resistance of the machine against the medium that is to be applied.

Always adhere to the safety data sheet of the medium that is to be applied.

 CAUTION!

Risk of injury through compressed air!

Uncontrolled leaks of compressed air can lead to serious injuries!

Prior to any work on the device, all compressed-air lines must be closed and bleed if nec-
essary.

 WARNING!

Sound pressure level

Depending on the operating conditions, the sound pressure of the device may cause hearing
damage.

Take suitable action to reduce the impact of the existing sound pressure level. The owner is
responsible for the type and implementation of suitable measures, which may depend on the
local conditions.

Mini spray gun MA-1

ENGLISH

 200-0345

 

GB–13

Summary of Contents for 1050-090-1127














































Reviews: