3 Safety and responsibility
3.1 Responsibility of the owner
Owner
The owner is the person, who directly operates the machine for commercial or economical pur-
poses or who allows a third-party to use/apply it and who is responsible for the legal product stew-
ardship for the protection of the user, the personnel or third parties.
Owner responsibilities
The machine is used in an industrial environment. The owner of the machine is therefore subject to
the obligations as stipulated by the Occupational Health and Safety Act.
In addition to the safety information in this manual, the country-specific safety, accident prevention
guidelines and environmental protection regulations, applicable at the site of implementation of the
machine must be adhered to.
Furthermore, the owner is responsible for making sure that the machine is always in perfect tech-
nical condition. Therefore, the following applies:
n
The owner must ensure that the maintenance intervals described in this operating manual are
adhered to.
n
The owner must have all safety equipment checked regularly for functionality and complete-
ness.
3.2 Intended use
The mini spray gun is used to spray different media. The nozzle size depends on the spray vis-
cosity of the spray medium.
The intended use also includes the compliance with all the information in this operating manual.
3.3 Specification for the operation of a complete machine
n
The operation without CE-marking is prohibited.
n
Prior to its use, the mini spray gun must be assembled to form a complete machine.
n
Only operate the mini spray gun after proper fastening on a suitable carrier construction.
3.4 Predictable misuse
Any use beyond the intended use or any other use constitutes misuse.
n
Only carry out installation and commissioning in accordance with the steps described in this
operating manual.
n
Always observe the applicable country-specific safety, accident prevention, occupational
safety, and environmental protection regulations etc. for the area of use for the mini spray
gun.
n
Ensure that the utilised hose lines fulfil the requirements with respect to pressure, chemical,
and mechanical loads.
n
Do not use sharply abrasive, chemically aggressive, very hot or very cold spray media without
first consulting with and receiving approval from Krautzberger GmbH.
n
Adhere to the spray media manufacturer's safety data sheets.
n
Only use the manufacturer's OEM parts.
n
Only operate the mini spray gun after proper fastening on a suitable carrier construction.
n
Do not hold the mini spray gun in your hand during operation.
Operating instructions
T-Dok-015-GB-Rev.0
[email protected], www.krautzberger.com
GB–12
Summary of Contents for 1050-090-1127
Page 44: ......
