30
Fig. 17. Connection diagram for individual gas control system components
Receiver Antenna
The antenna is part of the kit directly connected to the B6R-R8U gas remote control
receiver. It allows wireless control of the fireplace using a remote control. When
connecting the receiver to the gas control system, pay special attention not to mount
the antenna too close to the ignition cable.
Connecting the device to the gas installation
Attention!!!
The main burner module used in LEO 200 gas appliances consists of two
elements connected to the outlet of the GV60 controller by means of a tee.
To be able to inspect all elements of the automatic gas control system, first remove the
front window and remove the inspection element located in the base of the main burner.
