26
The diagram above shows all 8 variants of the exhaust air system for the entire LEO
series. The gray color on the chart is an auxiliary color. Point 0.0 means the beginning
of the air-flue gas system (exhaust outlet on the device).
Exhaust gas restrictors
In LEO series gas fireplaces it is necessary to adapt the exhaust gas restrictors (covers
/ deflectors) depending on the way the air-flue system is routed.
LEO45/68, LEO76/62
If a vertical terminal is used, the LEO45 / 68 and LEO76 / 62 devices do not require
modification. The use of a horizontal terminal forces the fireplace installer to
disassemble the deflector system according to fig. 12. In case of disassembly of the
deflectors, it is necessary to reinstall the screws in the body.
Fig. 12. Disassembly of deflectors: a) LEO45 / 68, b) LEO76 / 62
LEO100, LEO200
If a vertical terminal is used, the LEO100 and LEO200 series devices do not require
modification. The use of a horizontal terminal forces the fireplace installer to modify the
deflector system. The deflectors in the deflector system must be removed as per fig.
13.
b)
a)
