14
Adjustable feet
- All fireplaces in the LEO series are standard equipped with leveling
legs, which can change the height of the device. If necessary, you can also build a
platform to raise the firebox higher. Despite this solution, remember that the legs
cannot be removed.
Fig. 5. Leveling foot and adjustable clamping handle
Housing requirements -
This fireplace requires non-combustible material to complete
the building. The flanges on the front surface of the fireplace have a facing thickness
of 15 mm.
Buildings made of materials thicker than 15 mm -
If the cladding material is more
than 15 mm thick (for example: brick or river stone), install the body at the junction with
the masking flange. It is also possible to make a mask with a wider collar on request.
Contact an authorized reseller for additional information.
Hearth protection requirements -
This fireplace requires non-flammable floor
protection made of tiles, marble, bricks or other non-flammable material at least 30 mm
thick, which does not protrude above the base of the device.
Rules
The device should be installed in accordance with local regulations and standards in
force in the given country or region. Connection to chimney flues, wall and roof
passages as well as all types of elements used for fireplace installation should be made
based on applicable building law standards. The fireplace insert has been tested based
on the
EN-613 European Standard for Gas-fired convection room heaters
.
Placing of the appliance
Before connecting the device to the gas and chimney installation, you should carefully
choose the place of its installation. The insert should be located so that the air-flue gas
system has the smallest number of bends. This will guarantee an appropriate chimney
draft. It is also important that after connecting the insert to the gas installation, the
flexible connection pipes are not exposed to excessive twisting. The fireplace should
be at a minimum distance.
60 mm from non-flammable casing elements (Fig. 3). The temperature of the walls
exposed to direct fireplace must not be
higher than 80 ° C. Under no circumstances
should the device be placed near flammable materials such as wooden furniture, rugs
