Motor protection switch
The motor is protected from overload by a motor protection switch, which cuts out the
motor in the event of overload. However should the switch trip frequently, the cause of
the malfunction should be located and rectified (see page 11).
Replacements and inspection work should only be perfor-
med by qualified persons when the machine is discon-
nected from the power supply, i.e. with plug pulled out
from the electrical socket.
High pressure hose and spray device
The high pressure hose and spraying device supplied with the machine are made of high
grade material, they are also optimised for the machine and marked as required by the
appropriate regulations. (max. hose length 20 m)
All high pressure hoses, fittings and couplings are safety
component parts; therefore only manufacturer approved
and properly labeled component parts are to be used for
replacement. The high pressure hose and spray device
must be connected in a pressure-tight manner (without
leakage).
The high pressure hose may not be driven over, pulled
excessively, or twisted.
The hose may under no circumstances be pulled over
sharp edges.
13
Summary of Contents for HD 12/130
Page 5: ...5...
