The
Congratulations on purchasing your Kramer
WSI-1VGA
Step-in Module
which is ideal
for boardrooms and presentation rooms.
Kramer WSI-1VGA Step-in Module
The Kramer
WSI-1VGA
is a VGA and unbalanced stereo audio, remote control panel
that can, for example, fit into the Kramer
TBUS-1A, TBUS-4i or TBUS-5i
Table
Connection
Boxes
(see
Figure 3
). The
WSI-1VGA
is used for remotely taking control of
a compatible switcher, for example, the
VP-81KSi
.
Figure 1
and
Table 1
define the
WSI-1VGA
Step-in Module
.
Figure 1: WSI-1VGA Step-in Module Front and Rear Panel View
Table 1: WSI-1VGA Step-in Module Front and Rear Panel Features
# Feature
Function
1
STEP-IN
Button
Press to select the switcher input to which the WSI-1VGA is connected
2
PC INPUT
VGA 15-pin HD (F)
Connector
Connect to the video source (up to UXGA)
3
AUDIO INPUT
3.5mm Mini
Jack
Connect to the unbalanced stereo audio source
4 Audio Output 3.5mm Mini
Jack
Connect to the unbalanced stereo audio input of the switcher
5 Video Output VGA 15-pin HD
(F) Connector
Connect to the video input of the switcher. (The cable used must connect
all pins, for example, Kramer cable CP-GM/GM or C-GMA/GMA)
Figure 2
shows the wiring connections for the
WSI-1VGA
.
Figure 2: WSI-1VGA Wiring Connections
To install and connect the WSI-1VGA as illustrated in
Figure 2
:
Note
: The following steps assume that you have video (with 15-pin HD (M)
connectors) and audio (with 3.5mm mini jacks) cables running from the switcher
inputs to the inside of the
TBUS-1A
(see
Figure 3
).
1. After removing the required blanking panel, insert the
WSI-1VGA
into the
required opening of the
TBUS-1A
.
2. Insert the four screws to secure the module in place and tighten the screws.
3. Connect the video cable in the
TBUS-1A
to the 15-pin HD video output connector
on the rear of the
WSI-1VGA
.
4. Connect the audio cable in the
TBUS-1A
to the 3.5mm mini jack audio output
connector on the rear of the
WSI-1VGA
.
5. Plug the video source (for example, a computer) into the 15-pin HD PC INPUT
connector on the front panel of the
WSI-1VGA.
6. Plug the audio source (for example, a computer) into the 3.5mm mini jack AUDIO
INPUT connector on the front panel of
WSI-1VGA
.
7. Press the STEP IN button to take control of the switcher input.
