WP-211T Quick Start (P/N: 2900-300918QS REV 2)
P/N:
2 9 0 0 - 3 0 0 9 1 8 Q S
Rev:
2
Scan for full manual
WP-211T Quick Start Guide
This guide helps you install and use your
WP-211T
for the first time.
www.kramerav.com/downloads/WP-211T
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check w
hat’s in the box
WP-211T
1 Gang 4K60 4:2:0 2 HDMI to HDBaseT auto switcher
1 Power adapter and cord
1 Quick start guide
Step 2: Get to know your WP-211T
#
Feature
Function
1
INPUT 1
HDMI Connector
Connect to an HDMI source to route to HDBT OUT.
Button
Press momentarily to manually select HDMI 1 (button lights orange).
2
Operation Mode DIP-switches
By-default the DIP-switches are both set to OFF (left)
DIP-switch 1 OFF (left) - Last connected mode; ON (right) - Priority mode according to
DIP-switch 2 settings.
DIP-switch 2 OFF (left) - INPUT 1 is the default priority; ON (right) INPUT 2 is the default priority.
Controlling via the INPUT buttons overrides all DIP-switch settings and automatic switching until
the manually selected source disconnects, becomes inactive or
WP-211T
is powered off.
WP-211T
DIP-switches are located behind the faceplate and should be set during installation, before placing the
faceplate. Pressing an input button manually selects that input, independent of the DIP-switch settings.
3
INPUT 2
HDMI Connector
Connect to an HDMI Source to route to HDBT OUT.
Button
Press momentarily to manually select HDMI 2 (button lights orange).
4
Grounding Screw
Connect to the common ground (optional) to prevent static electricity from impacting the
performance of the unit.
5
GND 5V DC 2-pin Terminal
Block Connector
Connect to the supplied power adapter. Not needed on the
WP-211T
if there is a PoE provider
over HDBaseT.
6
HDBT
OUT RJ-45 Connector
Connect to an HDBaseT receiver (for example,
TP-580R
).
