Kramer Electronics Ltd.
WP-20CT
– Operating and Controlling WP-20CT
18
Turning Off Video Output
WP-20CT
enables you to turn off the video output so that the connected display goes blank.
The audio output is not affected by this setting.
To turn off the video output:
•
On the Main > AV Routing page (
), click the video icon under the output name.
The video output is turned off and the connected display goes blank.
Click the disabled video icon to turn on the video output.
Configuring Auto-Switching Mode
WP-20CT
enables you to configure how the system automatically decides which input to
switch to the output.
To configure auto-switching:
1. Go to the AV Settings > Auto switching tab.
Figure 11: AV Settings > Auto switching Tab
