Kramer Electronics Ltd.
VSM-4x4X
– Using Embedded Web Pages
22
Operating and Controlling in the Matrix Mode
VSM-4x4X
matrix mode includes two configuration setups (selected via the Active Mode drop-
Mode on page
•
Independent resolutions
– Allows to set the resolution and aspect ratio independently
for each output.
•
Fast switching
– Output resolution and aspect ratio for each output are identical and
are determined by output A.
Note that:
•
The circle on each input button appears green when an active signal is present.
•
The circle on each output appears green when a valid acceptor is connected to an
output.
Setting the inputs and outputs in the Matrix Mode
To set the inputs and outputs in the matrix mode see:
•
•
When in the Fast switching mode, the output resolutions and aspect ratio settings are
identical for all the outputs and are set by Output A.
Switching an Input to an Output
To switch an input to an output:
1. Click
AV
on the Navigation List. The AV Settings page appears (
2. Click a cross-point between an input and an output to switch an input to that output.
3. If required, do the following:
▪
Click
to mute the video output
.
▪
Click
to adjust the output volume. The following window appears:
Figure 17: Setting the Output Volume
The inputs are switched to the outputs.
