32
VS-62DT - Operating the VS-62DT Remotely via the Web Pages
9.5
Setting Authentication
The Authentication page enables activating device security and defining logon
authentication details. When device security is enabled, Web page access requires
authentication. The default user ID is
Admin
and the password is
Admin
.
Figure 17: Authentication Page
Item
Description
Activate Security
Button
Click to enable/disable security settings. When
enabled, the valid username and password must be
provided to allow Web page access
Change
Password
Current
Password box
Enter the current password
New
Password box
Enter the new password, (up to 15 printable ASCII
characters)
Retype New
Password
box
Retype the new password
CHANGE
button
Click CHANGE to save the new authentication
details
9.6
Setting Device Configurations
The Device Settings page enables you to identify your
VS-62DT
:
•
Set the unit name and view the model type, firmware version, serial number
and MAC address.
•
Edit IP settings, (for example, enable DHCP, set IP, mask and gateway
addresses and set UDP or TCP ports).
•
Save and load configurations.
•
Reset the device to factory default settings.
